Copper Busbar

  • Copper Busbar Manufacturers, Copper Busbar Factory, Supply Copper Busbar
Copper Busbar
  • LG VACUUM
  • JIANGSU CHINA
  • 30 DAYS
  • AS CUSTOMER REQUIREMENT

Copper Busbar is mainly used on the primary line (the copper line is used for the phase line, the neutral line and the ground line of the large current), and the connection of the primary components of the larger current on the electric cabinet is made of copper, for example, a row of electricity.

Product Introduction:

Copper Busbar is a kind of high current conductive product, suitable for high and low voltage electrical appliances, switch contacts, power distribution equipment, busway and other electrical engineering, and is also widely used in metal smelting, electroplating, chemical caustic soda and other super-current electrolysis smelting projects. Electrical copper bars have the advantages of low resistivity and large bendability.

Since  has better electrical conductivity than aluminum, copper platoons are widely used in electrical equipment, especially in complete power distribution units; A, B, C, N-phase busbars and PE busbars are generally used in power distribution cabinets. Copper platoons are used; copper platoons are generally marked with a phase letter or a phase lacquer in use, A phase copper slabs are marked as "yellow", phase B is "green", and phase C is "red". The N phase is "light blue" and the PE bus is "yellow green". Copper row


Application:

Copper Busbar is mainly used on the primary line (the copper line is used for the phase line, the neutral line and the ground line of the large current), and the connection of the primary components of the larger current on the electric cabinet is made of copper, for example, a row of electricity. The cabinet is connected to the main busbar between the cabinet and the cabinet. The main busbar is divided into the branch busbars on the switch electrical (isolation switch, circuit breaker, etc.) of each panel. The copper row is tinned and has a bare copper row. In the cabinet, the copper row connection can be tinned, embossed or conductive paste. The vacant space can be heated to shrink sleeve protection, and some are made of insulating paint. The most important consideration for the copper row is the current carrying capacity. Select the appropriate copper row according to the current. The screws at the joint must be tightened. Otherwise, the copper bus may be burnt when the current is large.


Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right