Horizontal Coil Winding Machine

  • Horizontal Coil Winding Machine Manufacturers, Horizontal Coil Winding Machine Factory, Supply Horizontal Coil Winding Machine
  • Horizontal Coil Winding Machine Manufacturers, Horizontal Coil Winding Machine Factory, Supply Horizontal Coil Winding Machine
Horizontal Coil Winding Machine
  • LG VACUUM
  • Jiangsu China
  • Within 30 days
  • 100 sets per year

Horizontal Coil Winding Machine adopts worm gear reducer, variable-frequency speed control system, with high efficiency and low noise, which has a wide range of variable frequency speed regulation, accurate and stable speed regulation.

Overview:

This high and low voltage winding machine is suitable for winding various kinds of small and medium sized high and low voltage transformer coils.

The main structure consists of variable speed box body, tail frame, discharge frame, electric control box, foot pedal switch and so on.


Functional features:

1. Horizontal Coil Winding Machine adopts worm gear reducer, variable-frequency speed control system, with high efficiency and low noise.

2. The motor has braking function and is sensitive and reliable.

3. The spindle adopts frequency conversion speed control, high-speed sensor count, braking slope can be set, start and stop without impact.

4. Wide range of variable frequency speed regulation, accurate and stable speed regulation.


Winding machine:

Horizontal Coil Winding Machine is located on the right side of the equipment,the output torque is wound by the winding shaft.

The mechanical strength and the output torque of the winding machine are the priority in the design. The design is based on the maximum limit size of the workpiece material and the sufficient margin.


Horizontal Coil Winding Machine box is made up of steel plate welding, which is processed after annealing and stress reduction.The transmission mechanism and reducer ensure the mechanical strength of the large torque output and the overall smooth operation of the equipment and the extremely low working noise.


Adopt the non-pole variable frequency speed control mode independent speed control.Low speed section provides maximum torque, suitable speed.The high speed section provides the right torque, the highest speed.In order to meet different requirements of winding process.When the spindle is wound, the slope of starting and stopping acceleration is set reasonably, and the braking function is configured to improve the operation of the equipment.Adopt high power drive motor, abundant reserve power.


Main Technical Specification:

1.1

Height of center

1300mm

1.2

Effective distance of the center of the axis

2500mm

1.3

Running torque

Max5000N\M

1.4

Working speed

0-24r\min

1.5

Speed adjustment mode

Frequency control

1.6

 

 

 

Applicable workpiece range

Outer diameter ≤1600 mm

Inner diameter ≥80 mm

Axial direction ≤2500mm

Weight≤5000kg

1.7

Power of the whole machine

11KW

1.8

The maximum setting number of the counter

9999.9

1.9

Lead size

Width : 0.4mm - 15mm can use round wireand flat wire,enamelled wire and paper covered wire.

1.10

Counting method

The 5-digit display can be pre-set for the total number of turns and the total number of turns. The reversible count and power-off hold function.

1.11

Power supply

380V/50HZ

1.12

Color

RAL6025 polyurethane finish (fern green)

1.13

The size of the winding shaft

60*60 square axis (please note if you need to install the disc of the telescopic mold)

1.14

The weight of the whole machine

2000 kg

1.15

Pay-off swift

Each set of wire racks is equipped with one set of 3 axis pneumatic tension movable wire racks.(see figure below)


Details Show:
Winding Machine


Coil Winding Machine


Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right