Insulation Heel Block For Transformer
- LG VACUUM
- JIANGSU CHINA
- 30 DAYS
- AS CUSTOMER REQUIREMENT
By using the Heel Block for Transformer, the dry transformer can be used to derive the dry transformer through the guide slot during the use of the dry transformer; at the same time, the heat source generated by the dry transformer can also be exported to the dry transformer via the guide slot; Dry-type transformer working environment, thereby improving the safety factor of dry-type transformer.
Heel Block for Transformer：
Product Function：
By using the Heel Block for Transformer, the dry transformer can be used to derive the dry transformer through the guide slot during the use of the dry transformer; at the same time, the heat source generated by the dry transformer can also be exported to the dry transformer via the guide slot; Dry-type transformer working environment, thereby improving the safety factor of dry-type transformer
Technical Parameters：
Heel Block for Transformer | |||
Model | SG11-R-20/10 | ||
The length of the upper | 130 | The bottom length | 100 |
Overall width | 60 | The distance from the projection to the ramp | 53 |
Overall heigh | 105 | Protruding end length | 20 |
compressive strength | >170MPa | Distortion temperature | >200℃ |
Heel Block for Transformer | |||
Model | SG11-R-1600/10 | Withstand voltage | 10KV |
The length of the upper | 120 | The bottom length | 100 |
Overall width | 60 | The distance from the projection to the ramp | 41 |
Administration of degrees | 105 | Protruding end length | 20 |
Compressive strength | >170MPa | Distortion temperature | >200°C |
Heel Block for Transformer | |||
Model | SG11-R-1250/10 | Withstand voltage | 10KV |
The length of the upper | 120 | The bottom length | 80 , |
Always avoid the | 50 | The distance from the projection to the ramp | 34 |
Administration of degrees | 95 | Protruding end length | 15 |
Compressive strength | >170MPa | Distortion temperature | >200℃ |
